Comelit 3360 - 2. Changing a name or a code in the directory

EN
6
M_
OK
SCROLL CANC
MARIO ROSSI_
OK OK
SCROLL CANC
2. Changing a name or a code in the directory
CAUTION: not available if the call mode is IMMOTEC
STANDARD or IMMOTEC INDIRECT, see page 13
1. access programming mode, see page 5
2. select the menu items:
Name directory ⇒ Change names
ENTER NAMES
DELETE NAMES
CHANGE NAMES
CLEAR ALL NAMES
OK OK
SCROLL CANC
ENTER PART
OF THE NAME
REQUIRED
8. to exit, press
3. press
or to confi rm
5. to confi rm the fi rst letter of the name, press
6. to display the name that you want to change, scroll
through the directory using
7. to confi rm the selected name that you want to change,
press or
MARIO ROSSI
OK OK
SCROLL ESC
4. enter the name using the alphanumeric keypad, for the
use of special characters see table on page 3
CODE:
_ _ 2
OK
ESC CANC
5. to confi rm, press
6. enter the code (max. 3 digits) using the alphanumerical
keypad
7. press
to confi rm
MARIO ROSS_
OK
ESC CANC