System Settings
4-18
computer and the patient cases saved in [File List] screen can be viewed on
the computer connected. Please refer to Chapter 5.4 for detail.
FTP (File Transfer Protocol) allows one computer to acquire files from or
transfer files to another computer. You can connect the ECG machine to a
computer and designate a user name and password to use the computer in a
safe way. Whenever the computer accesses the files on the data management
window of the ECG machine, FTP will be run and you can only copy the files
to your computer to use.
[Transfer Type]：[Close], [FTP Transfer], [DICOM Transfer], [Ecg Network].
[FTP Transfer]： It can transfer the case files to the specified folder via
the FTP server. In the main interface, the [Printer Select] is set to
[Close], and it will transfer the stored files of picture format to the
specified folder when the storage is picture format; in [File] interface, all
the selected files can be transferred.
[DICOM Transfer]：After the DICOM server is activated on the computer,
only the files of DICOM format can be transferred in the main interface.
[Ecg Network]：After the software of ECG Network is activated on the
computer, the waveforms on the instrument can be synchronized to the
ECG Network.
[Close]: Files cannot be transferred.
[Obtain Method]：[Close],[ HL7], [DICOM Worklist].
[HL7]： When the transfer mode is not the ECG Network, enter the soft
keyboard of the second ID, input the corresponding second ID, and click the
extraction key on the soft keyboard to obtain the patient information. After
the extraction succeeds, the corresponding information will be automatically
inputted to the relevant options in the patient information page.
[DICOM Worklist]：When the transfer mode is not the ECG Network, set the
DICOM AE to obtain the folder name of patient information, enter the soft
To Next Page
Loading...
