LED-status indication GE 300
30 3.3/0518
LED-status indication
Motherboard G3-GEM
Motherboard of the Intercom Server GE 300.
LED-status Description
LED is blinking in a one
second rhythm
The Intercom Server is working correctly
LED is blinking fast During initialisation
LED is permanently off No power or hardware fault
LED is permanently on During reset/warm start or hardware fault
LED is blinking in
rhythm definition error
“short - short - long“
At least one wrong or missing plug-in card
NOTE: LED of GEZ 300 is not for status indication
The LED of the expansion housing GEZ 300 is switched on permanently, and is not used as status in-
dication, but rather only as an indication for the connected power supply. The GEZ 300 does not h its
own ON/OFF-switch. It is switched with the ON/OFF switch of the Intercom Server GE 300.
To Next Page
Loading...
