ComNav K Series - Introduction; Overview of K-Series OEM Board; Evaluation Kit

To Next Page

To Previous Page

K-series OEM Board User Guide

1. Introduction

This User Guide provides a brief introduction of K-series OEM board installation, configuration and operation.

We recommend that you read this manual carefully even if you have used GNSS products from other brands.

1.1 Overview of K-series OEM board

ComNav Technology K-series OEM boards and modules support existing and future constellations, which are

widely used in high-accuracy positioning and navigation applications. With Quantum

technology, it

remarkably improves the stability and reliability of positioning accuracy in standalone and RTK modes.

Following table on page 7 shows specifications of K-series OEM boards and modules.

1.2 Evaluation kit

If you order ComNav Technology OEM board or module evaluation kit, please check carefully when you

receive shipping box as the following figure:

K-series OEM board Evaluation kit K8-series OEM module Evaluation kit

K-Series OEM Board *1

K8-series OEM module *1

Interface Board *1

K8-series EVK *1

(*K8 Module inside)

Power Adapter *1

USB Type-C cable *1

TNC-K/MCX-K Adapter *1

Serial cable *1

Serial Cable *1

SMA-J/TNC-K Adapter

(Optional)

MCX-JW/MCX-J Cable(22cm) *1

GNSS Antenna Cable (Optional)

GNSS Antenna (Optional)