CompAir Classic 05 - Page 12

Key to symbols used
Note: Do not mix oils.
Torque settings
Listed below are recommended torque settings.
Note: Torque settings must be applied when indicated.
Page 12
CompAir Hydrovane
Introduction
Recommended Grease
Silkolene 660
Motor Grease
Esso Unirex N3
Shell Albida R2
Shell Nerita HV
SKF LGHQ3
Castrol Optimol PD2
Recommended Oils
Fluid Force Clear
Fluid Force 2000
Fluid Force HPO
S
105
S
105
Service Tools Required and Part Reference
577
Loctite Required and Specification Number
22mm
Spanner Required (mm) A/F
6mm
Allen key Required (mm)
Lubricate With Sump Oil
Silco
660
Silco
660
Grease Required (Specification)
20
Nm
20
Nm
Torque Setting Nm.
Torque Settings
Thread Size (mm) Setting (Nm)
615
835
10 60
12 95
16 160
42 400