xiii
Functional Table of Contents
This functional table of contents helps you to quickly locate the
descriptions of firmware functions.
Chapter 1 Functional Description
Page number
Identifying Drives 1-8
Flash Selected SCSI Drive 1-8
Flash All SCSI Drives 1-8
1.4.2
Flash All but Selected Drives 1-8
Automatic rebuild and manual rebuild 1-9
Automatic rebuild 1-9
1.4.3
Manual rebuild 1-10
1.4.4
Concurrent Rebuild in RAID (0+1) 1-11
Chapter 3 Out-of-Band via Serial Port and
Ethernet
Page number
Communication Parameters:
configuring RS-232 connection
3-1
Configuring Ethernet connection: reserved space and port
IP
3-6
NPC Onboard 3-9
Chapter 4 LCD Screen Messages
Page number
View and Edit Event Logs 4-7
Chapter 5 /
Chapter 7
Starting RAID via the LCD
Panel/Terminal Emulation
Page number:
LCD/ Terminal
Starting RAID Configuration
Caching Parameters 5-1/7-1
Optimization mode and stripe size 5-2/7-3
Optimization for sequential or random I/O 5-3/7-3
5.2/7.2
Write-Back/Write-Through Cache Enable/Disable 5-3/7-3
5.3/7.3
Viewing Connected Drives 5-5/7-4
Creating a Logical Drive 5-6/7-5
Choosing a RAID Level 5-6/7-6
Choosing Member Drives 5-6/7-6
Maximum Drive Capacity 5-7/7-6
Spare Drive Assignments 5-7/7-7
Logical Drive Assignments 7-7
Disk Reserved Space 5-7/7-7
Write Policy 5-7/7-7
Initialization Mode 5-7/7-8
5.4/7.4
Stripe Size 5-8/7-8
Creating a Logical Volume 5-10/7-10
5.5/7.5
Initialization Mode 5-10/7-10
To Next Page
Loading...