xiv
Write Policy 5-10/7-10
5.6/7.6
Partitioning a Logical Drive/Logical Volume 5-12/7-11
5.7/7.7
Mapping a Logical Drive/Logical Volume to Host LUN 5-13/7-13
Assigning Spare Drive, Rebuild Settings 5-14/7-15
Adding a Local Spare Drive 5-14/7-15
Adding Global Spare Drive 5-15/7-16
5.8/7.8
(Logical Drive) Rebuild Settings 5-15
Viewing and Editing Logical Drives and Drive
Members
5-16/7-16
Deleting a Logical Drive 5-16/7-17
Deleting a Partition of a Logical Drive 5-17/7-17
Assigning a Logical Drive Name 5-18/7-17
Rebuilding a Logical Drive 5-18/7-18
Regenerating Logical Drive Parity 5-19/7-19
Media Scan 5-20/19
5.9/7.9
Write Policy 5-21/20
Viewing and Editing Host LUNs
5-22/7-21
Viewing and Deleting LUN Mappings 5-22/7-21
5.10/7.10
Pass-through SCSI Commands 5-22/7-21
Viewing and Editing SCSI Drives
5-23/7-22
Scanning a New SCSI Drive 5-23/7-23
Identifying a Drive 5-24/7-23
5.11/7.11
Deleting Spare Drive (Global/Local Spare Drive) 5-25/7-24
Viewing and Editing SCSI Channels
5-25/7-25
Viewing and Re-defining Channel Mode 5-25/7-25
Setting Channel ID/Host Channel 5-26/7-26
Viewing channel ID 5-26/7-26
Adding a Channel ID 5-26/7-26
Deleting a Channel ID 5-27/7-27
Setting a Channel’s Primary ID/Drive Channel 5-27/7-27
Setting a Channel’s Secondary ID/Drive Channel 5-28/7-28
Setting a SCSI Channel’s Terminator 5-28/7-28
Setting the Transfer Speed 5-29/7-28
Setting the Transfer Width 5-30/7-29
Viewing and Editing a SCSI Target/Drive Channel 5-30/7-30
Slot Number 5-31/7-30
Maximum Synchronous Transfer Clock 5-31/7-31
Maximum Transfer Width 5-31/7-31
Parity Check 5-32/7-31
Disconnecting Support 5-32/7-32
Maximum Tag Count 5-32/7-32
Restoring the Default Setting (SCSI Bus) 5-33
5.12/7.12
Data Rate 7-32
System Functions
5-34/7-34
Mute Beeper 5-34/7-34
Change Password 5-34/7-34
Disabling the Password 5-35/7-36
Reset Controller 5-35/7-36
Shutdown Controller 5-35/7-36
Saving Configuration Data
Saving NVRAM to Disks 5-36/7-38
5.13/7.13
Restore NVRAM from Disks 5-36/7-38
Controller Parameters
5-37/7-37
Controller Name 5-37/7-37
LCD Title Display Controller Name 5-37/7-37
Time Zone 5-38/7-41
Date and Time 5-39/7-41
5.14/7.14
Setting Password
To Next Page
Loading...