5-19
Compaq ProLiant 3000 Servers Setup and Installation Guide
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: F-CH05.DOC Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Banyan VINES Device Drivers from Compaq
Your server must have certain device drivers for some server options to operate
using the Banyan VINES operating system. Compaq provides driver support
for Banyan VINES 6.x and 7.x.
These drivers are located on the Compaq SmartStart and Support Software CD
you received with your server. You can use SmartStart to create a Banyan
VINES Support Software Diskette (SSD) from Compaq to support a manual
installation of Banyan VINES.
There are two types of SSDs:
■ LAN Adapter SSD
■ Peripheral Adapter SSD
These SSDs contain the README files that list available drivers and driver
installation procedures.
These drivers can also be ordered through SoftPAQ and can be downloaded
from the Compaq website.
Manual installation
If you choose not to let SmartStart configure the server:
1. Insert the Compaq SmartStart and Support Software CD into the drive.
2. Boot your system.
3. Select Manual Installation.
4. Follow the instructions that display on the monitor.
To Next Page
Loading...
Need help?
General
