5-20
Server Configuration and Utilities
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: F-CH05.DOC Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Diagnostics and Other Utilities
■ When you select the Diagnostics and Utilities feature from the System
Configuration Utility main menu, the utility provides prompts to test,
inspect, upgrade, and diagnose the server.
■ Diagnostics and Utilities are located on the system partition on the hard
drive and must be accessed when a system configuration error is
detected during the Power-On Self-Test (POST).
■ Run the Inspect Utility once the computer has been configured to get
information about the operating system environment.
■ For instructions on using the Diagnostics Utility and other Compaq
utilities, refer to the Compaq Systems Reference Library CD.
To Next Page
Loading...
Need help?
General
