5-6
Server Configuration and Utilities
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: F-CH05.DOC Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
System Configuration Utility Main
Menu
This overview of the main menu options explains how to access the main menu
and how to set the power-on features. The following options are available from
the main menu:
■ System Configuration - Takes you through the configuration process
step-by-step. Select the System Configuration option when a
configuration change is required. For example, select this option when
adding, replacing, or removing expansion boards, or when adding a
diskette or hard drive.
■ Operating System Installation - Allows you to install one of the
operating systems listed or to specify installation of an operating system
that is not listed.
■ Diagnostics and Utilities - Tests and inspects the computer.
■ Exit from this Utility - Restarts the computer.
System Configuration Menu
The following options are available from the System Configuration Utility
menu:
■ Configure Hardware
■ Power-On Defaults
■ System Partition
■ Configuration Backup
To Next Page
Loading...
Need help?
General
