Compaq ProLiant 3000 Setup And Installation Guide

2-6
Installation Overview
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 3:15 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
12. Connect cables: keyboard, mouse, monitor, network, and power cables.
13. Turn on the computer and insert the SmartStart and Support Software
CD to configure and manage the server. When the server boots from the
SmartStart program, it automatically starts the System Configuration
Utility. See Chapter 5 for detailed information.
14. Register your server.
For complete details on the SmartStart program, read the SmartStart installation
card included in your SmartStart package.
After the SmartStart program has finished configuring your system, you have
completed the installation of your new Compaq server.
Installing a Tower Model
1. Unpack the server.
2. Install any hardware options in the server. See Chapter 4 and the options
kits for detailed instructions.
3. Set system board switches. Refer to Hardware Installation and
Configuration poster.
4. Connect cables: keyboard, mouse, monitor, network, and power cables.
5. Turn on the computer and insert the SmartStart and Support Software
CD to configure and manage the server. When the server boots from the
SmartStart program, it automatically starts the System Configuration
Utility. See Chapter 5 for detailed information.
6. Register your server.
For complete details on the SmartStart program, read the SmartStart installation
card included in your SmartStart package.
After the SmartStart program has finished configuring your system, installation
of your new Compaq server is complete.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English