Compaq ProLiant 3000 Setup And Installation Guide

5-8
Server Configuration and Utilities
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: F-CH05.DOC Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Setting Power-On Defaults
You can set and change the Power-On features at any time.
1. Select System Configuration from the Main Menu; then select
Power-On Defaults.
2. Set the current date in the format:
MM-DD-YYYY
3. Set the correct time in the format:
HH:MM:SS
4. Set the Power-On Num Lock state:
( ) Off
(*) On
* This activates the numeric keypad when the computer is turned ON.
System Partition
The System Partition option allows you to copy and delete configuration files
and create, upgrade, or delete a system partition on the hard drive for the
utilities.
The following menu options are available:
■ Create System Partition
■ Upgrade System Partition
■ Delete System Partition
■ Copy Files
■ Delete Files

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English