Compaq ProLiant 3000 Setup And Installation Guide

6-9
Compaq ProLiant 3000 Servers Setup and Installation Guide
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: G-CH06.DOC Last Saved On: 1/6/99 12:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Viewing the Event List
1. From Compaq Insight Manager, select the appropriate server, then select
View Device Data.
The selected server is displayed with buttons around its perimeter.
2. Select the Recovery button.
3. Select Integrated Management Log.
NOTE
: You can only view the list from the Recovery/Integrated Management
screen. To print the list, follow the instructions below.
4. If a failed component has been replaced, select the event from the list,
then select Mark Repaired.
Printing the Event List
NOTE
: You can only view the list from the Recovery/Integrated Management
Log screen as described above. To print the list, follow the instructions below.
1. From the Compaq Insight Manager, select the appropriate server.
The selected server is displayed with buttons around its perimeter.
2. Select the Configuration button.
3. Select the Recovery button.
4. Select Print.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English