B-3
Compaq ProLiant 3000 Servers Setup and Installation Guide
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: I-APPB.DOC Last Saved On: 1/4/99 5:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Power Cord Set Requirements- By Country
Continued
Country Accredited Agency Applicable Note Numbers
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
NOTES:
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
2
conductor size.
Power cord set fittings (appliance coupler and wall plug) must bear the certification mark
of the agency responsible for evaluation in the country where it will be used.
2. Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall plug must
be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3.
Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or
VCTF, 3-conductor, 1.0 mm
2
conductor size. Wall plug must be a two-pole grounding type
with a Japanese Industrial Standard C8303 (7A, 125V) configuration.
To Next Page
Loading...
