Index-1
Compaq ProLiant 3000 Servers Setup and Installation Guide
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: K-INDX.DOC Last Saved On: 1/12/99 1:34 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Index
A
About This Guide viii
AC current load 2-3
accessing
DIMM memory sockets 4-10
hot-plug areas 4-23
IMD 4-21
PCI/ISA slots 4-12
processor 4-8
system board components 4-5
System Configuration Utility
5-5, 5-6
airflow, requirements 3-6
architecture 1-2
arrow keys, IMD 6-3
ASR-2 1-6, 1-8
error events 6-13
assembly 4-1
automatic configuration 5-3
Automatic Server Recovery-2 See
ASR-2
auxiliary power connector 4-5
B
backplane boards
drive cage 4-1
power supply 4-1
backup, configuration 5-11
Banyan VINES 5-13
device drivers, installation 5-19
bays, media 1-3
boards See system boards
brackets
cable management arm 3-23,
3-26, 3-27
mounting 3-8, 3-10, 3-11, 3-13,
3-14, 3-15, 3-16, 3-17, 3-19,
3-20, 3-21, 3-24, 3-25
buttons, IMD 6-3
C
cables
connecting IMD illustrated 4-22
floppy connector 4-5
management arm 2-5, 3-8
attaching to bracket 3-26
bracket 3-23
bracket for 3-23
bracket installation ,
illustrated 3-23
installation, illustrated 3-27
management arm bracket 3-23,
3-26, 3-27
support 2-5
support for rack server 3-28
cache
integrated 512-KB 1-2
memory 1-2
cage nuts 3-16, 3-17, 3-18, 3-26
for rack model server 3-18
illustrated 3-19
CD-ROM drive 1-3, C-1
illustrated C-1
check mark, IMD 6-1
colors, video 1-3
Compaq Insight Manager See Insight
Manager
Compaq Installing Rack Products
Audio Visual (AV) CD 3-9
Compaq System Configuration Utility
See System Configuration Utility
Compaq website xii
To Next Page
Loading...
Need help?
General
