5
Maintenance
TIP: If gasket on the process
filter cap becomes loose or
detached from the filter cap,
secure with high temperature
silicone adhesive.
2
Cleaning the Process Filter (continued)
3 Place the clean filter in the dryer, and use the
wing nut and washer to hold the filter in
place. Make sure the filter is completely
seated against the back of the filter housing.
4 Place cover cap, and use the latches to attach
the filter cover securely.
CAUTION: Hot surfaces.
Always protect yourself
from hot surfaces inside
and outside the dryer and
drying hopper.
Carousel Plus D-series Dryers 600-5000
Maintenance l 5-7
To Next Page