Conair Carousel Plus D Series - C L E a N I N G T H E a F T E R C O O L E R C O I L S

Maintenance l 5-9
Cleaning the Aftercooler Coils
You need to clean the aftercooler coils to keep them working efficiently. Cleaning frequency
depends on the type and amount of material you process.
1 Stop the dryer and lockout the main power.
2 Turn off the water flow (close valves) to the
water supply line and return line. Disconnect supply and return lines.
3 Remove the bolts securing the aftercooler cover. Remove the cover.
4 Remove the aftercooler by pulling it out of the aftercooler housing.
D600 - 1000
Models
D1300 - 5000
Models
(continued)
OFF
O
ON
I
5
Maintenance