Conair Carousel Plus D Series - I N S T a L L a T I O N

Installation l 3-1
Installation
Unpacking the boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Preparing for installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Positioning the dryer on the floor . . . . . . . . . . . . . . . . 3-4
Removing the cable tie from the desiccant wheel . . . . . 3-4
Installing the regeneration
exhaust cover . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Connecting the Process RTD Probe . . . . . . . . . . . . . . . 3-5
Connecting the Setback RTD Probe . . . . . . . . . . . . . . . 3-5
Installing the return air inlet and
air outlet adapters . . . . . . . . . . . . . . . . . . . . . . . 3-6
Connecting the main power . . . . . . . . . . . . . . . . . . . . 3-7
Opening the dryer doors . . . . . . . . . . . . . . . . . . . . . . 3-8
Checking for proper air flow . . . . . . . . . . . . . . . . . . . 3-9
Connecting the air hoses to a single hopper . . . . . . . . 3-12
Connecting the air hoses to ResinWorks . . . . . . . . . . . 3-12
Connecting air hose adapters . . . . . . . . . . . . . . . . . . 3-15
Connecting the aftercooler
and optional precooler (W600-W1000) . . . . . . . . . 3-16
Connecting the aftercooler
and optional precooler (W1300-W5000) . . . . . . . . 3-17
Mounting a loader on the hopper. . . . . . . . . . . . . . . . 3-18
Testing the installation . . . . . . . . . . . . . . . . . . . . . . 3-19
SECTION
3
3
Installation