Conair Carousel Plus D Series - Typical Applications

2-2 l Description
What is the Carousel Plus D Series
Dryer?
The Carousel Plus D Series Dehumidifying Dryer produces low-dewpoint air that removes
moisture from hygroscopic plastics. The dryer pulls moist air from a drying hopper and cir-
culates it through a dehumidifying desiccant wheel. The dryer then circulates the air through
the material in the hopper.
The dryer’s closed-loop design ensures a continuous supply of dehumidified air while pre-
venting contamination from moisture in the plant.
Typical Applications
1 Dryer on the floor, single hopper (with delivery air heat
Heater Pack on the hopper or a HTC on a floor stand).
2 Dryer on the floor, multiple hoppers in central
configuration (ResinWorks) with separate heat
source for each hopper.
3 Dryer on the floor, hopper(s) connected to Conair
GasTrac delivery air heater.
The Carousel Plus D Series Dryer can be used successfully in applications that require:
• A contamination-free drying environment.
• A constant flow of dehumidified air.
NOTE: The D600 - 5000 pro-
vides no heat to the delivery
air. A separate heat source is
required at the hopper(s) inlet
to heat the air to the desired
drying temperature.
0
(continued)