Descriptio n l 2-3
NOTE: Throughput rates will vary
by MDCW model and type of
material. See the Specification
pages for recommended
throughputs.
Typical Applications
The MDCW Carousel Plus Dryer was designed for drying and conveying beside
the press. But it can also be used to pre-dry material in one location, and then
transport the dried material to another location for conveying into the processing
machine.
The MDCW can be used successfully in applications that require:
• A contamination-free drying environment.
• Drying temperatures of 100° to 375°F {38° to 191°C}.
• Throughput rates of 15 to 100 lbs {6.8 to 45.4 kg} per hour (some materials can
be run at a higher rate).
• Dew points of -40°F {-40°C}.
• Conveying material at distances up to, but not more than, 8 feet {2.4 m}
vertically and 6 feet {1.8 m} horizontally. (The long haul option allows
conveying material at distances up to, but not more than, 15 feet {4.6 m}
vertically and 50 feet {15.2 m} horizontally.)
✐
(continued)
2
Description
To Next Page
Loading...
