Conair MDCW Carousel Plus W25 - 3 Installation

Installa tion l 3-1
Installation
Unpacking the boxes . . . . . . . . . . . . . . . . . 3-2
Preparing for installation . . . . . . . . . . . . . . 3-4
Installing the MDCW . . . . . . . . . . . . . . . . . 3-5
Connecting the conveying lines . . . . . . . . . 3-6
Connecting the demand sensor . . . . . . . . . . 3-7
Mounting a loader on the hopper . . . . . . . . . 3-7
Connecting material lines for
self-loading (Optional) . . . . . . . . . . . . . 3-8
Connecting the main power . . . . . . . . . . . . 3-10
Connecting compressed air for
self-loading (Optional) . . . . . . . . . . . . 3-11
Checking for proper air flow . . . . . . . . . . . 3-12
Connecting the aftercooler . . . . . . . . . . . . 3-14
Testing the installation . . . . . . . . . . . . . . . 3-15
Using communications . . . . . . . . . . . . . . . 3-16
S E C T I O N
3
3
Installa tion