Typical Applications (continued)
Model Drying Temperature Range
Low temperature (with precooler)* 100° - 150°F {38° - 66°C}
Standard 150° - 240°F {66° - 116°C}
High heat (with aftercooler)* 150° - 375°F {66° - 191°C}
Low-high (with aftercooler & precooler)* 100° - 375°F {38° - 191°C}
* See page 3-12 and Appendix B.
• Throughput rates of 15 to 100 lbs {6.8 to 37.3} per hour (some materials
can be ran at a higher rate).
• Dewpoints of -40°F {-40°C}.
Use the aftercooler when:
• You are drying at temperatures over 240°F {116°C}.
• Throughput rates are less than 50% of the dryer’s rated capacity.
• You are pre-drying material at temperatures over 150° F {66°C}.
Dryer Standard Features:
• Audible and visual alarm
• Temperature setback
• Dewpoint monitor/dewpoint control
• DeviceNet communications (Alternate communications are
available: Modbus, SPI and Ethernet)
Description l 2-3
2
Description
When supplied for central drying
applications, the W Series Dryer
is not equipped with a process
heater. Therefore, as a central
dryer, the W dryer will only
supply dry air to the hoppers.
To Next Page
Loading...
