4
Operation
Operatio n l 4-39
Using the Auto Start Timer
You can set the dryer to start and stop automatically using the Auto Start and
Auto Stop functions. The Supervisor Password is necessary to use this
function.
Programming Auto Start
The Auto Start time can be programmed using the Auto Start Countdown
screen. This screen can be accessed under the SETUP, PROC, and OTHER
screens from the “Dryer Main Menu”, screen 12:
SCREEN 36 SCREEN 37
SCREEN 56
Once the Auto Start day and time has been programmed, the Auto Start
Countdown screen (screen 33) will show the amount of time remaining before
the dryer will automatically start. The LED on the front of the display beside
the word Auto Start will flash if the dryer is set to start automatically. The
dryer can be set to automatically start each day.
Programming Auto Stop
The Auto Stop time can be programmed using the Auto Stop Countdown
screen. This screen can be accessed under the SETUP, PROC, and OTHER
screens from the “Dryer Main Menu”, screen 12:
SCREEN 36 SCREEN 37
SCREEN 57
Once the Auto Stop day and time has been programmed, the Auto Stop
Countdown screen (screen 34) will show the amount of time remaining before
the dryer will automatically stop. The dryer can be set to automatically stop
each day.
MONDAY START TIME
ON 8:00 AM
MONDAY STOP TIME
ON 8:00 PM
Dryer Setup
Proc Alm Disp Other
Setup Process
Proc Regen Other
Dryer Setup
Proc Alm Disp Other
Setup Process
Proc Regen Other
NOTE: To use the Auto
Start or Auto Stop Timer,
you must have the Auto
Start function enabled
(see screen 55, page
4-22).
✐
To Next Page
Loading...
