Connecting the Main Power
CAUTION: Always disconnect and lock out the main power sources before
making electrical connections. Electrical connections should be made only by
qualified personnel.
1 Open the dryer’s electrical enclosure. Turn the
disconnect dial on the dryer door to the Off or “O”
position. Lock out the main power (see Page 1-6 for
complete lock out information). Turn the captive
screw, and swing the door open.
2
Insert the main power
wire through the knockout in
the side of the enclosure. Secure the wire with an
appropriate strain relief.
3
Installa tion
Installa ti on l 3-5
IMPORTANT: Always refer to the
wiring diagrams that came with
your dryer before making electrical
connections.
3
Connect the power wires
to the three terminals at the top of the power
disconnect.
4 Connect the ground wire to the ground lug.
Ground Lug
To Next Page
Loading...
