Installa ti on l 3-15
3
Installa tion
Using Communications
The DeviceNet cable feature is a standard feature on W 15 - 100 dryers with DC-2
controls. It allows the dryer to be connected your communications network.
If the communications feature will NOT be used for your application, simply coil
the cable to keep it out of the way. If the communications feature IS to be used for
your application, please refer to the documentation supplied in the Communication
Addendum of this manual.
To use the optional SPI, Modbus, Ethernet or standard DeviceNet communications,
see the Addendum for hardware installation and configuration.
DeviceNet Connection
SPI Connection
Ethernet Connection
To Next Page
Loading...
