A pp e n d i x l B - 3
U np a ck i ng t he bo x es ( c o nt i nu e d)
Conair Part #18090003: 8 inch Hard Pipe GT Kit
❒ Two (2) 8 inch 1D 90, 16 GA, coated CS (PN 2671310201)
❒ One (1) welded tube, 8 inch x 78 inch, coated CS, 19 GA (PN 2671291001)
❒ One (1) welded tube, 8 inch x 39 inch, coated CS, 19 GA (PN 2671290901)
❒ One (1) welded tube, 8 inch x 20 inch, coated CS, 19 GA (PN 2671290801)
❒ One (1) welded slip tube, 8 inch x 39 inch, coated CS, 19 GA (PN 2671330601)
❒ One (1) welded slip tube, 8 inch x 20 inch, coated CS, 19 GA (PN 2671330501)
❒ One (1) welded slip tube, 8 inch x 8 inch, coated CS, 19 GA (PN 2671330401)
❒ Three (3) 8 inch slip tube ring seal (PN 26713202)
❒ One (1) Conair flange adaptors (PN 18477901)
❒ Nine (9) 8 inch bolted pull ring, galvanized (PN 2671350201)
❒ Six (6) 8 inch U-shaped gasket, 19 GA (PN 2671360201)
❒ Two (2) 8 inch hose, high temp (PN 2400071002)
❒ One (1) 8 inch Conair hard pipe gasket (PN 185107930)
❒ Four (4) 8 inch hose clamps (PN 24900124)
❒ Six (6) 8 inch insulation (PN 25902417)
❒ One (1) 8 inch 90° insulation (PN 18195701)
❒ Eight (8) 5/16-18NC x 1 inch hex head wiz lock cap screw (PN 21202504)
❒ Eight (8) 516-18 hex head wiz lock nut (PN (22300804)
❒ Twenty-five (25) feet of 3 inch ASJ SSL insullation tape (PN 25910404) (insulation)
Conair Part #18090004: 12 inch Hard Pipe GT Kit
❒ Two (2) 8 inch hose connection, coated CS, 19 GA (PN 2671400201)
❒ Two (2) 8 inch hose, high temp (PN 2400071002)
❒ Two (2) 8 inch Conair hard pipe gasket (PN 185107930)
❒ Two (2) 8 inch hard pipe flange x 12 inch tubing adaptor (PN 18477910)
❒ Four (4) 8 inch hose clamps (PN 24900124)
❒ Two (2) 12 inch 1D 90, 16 GA, coated CS
❒ One (1) welded tube, 12 inch x 78 inch, coated CS, 19 GA (PN 2671291501)
❒ One (1) welded tube, 12 inch x 39 inch, coated CS, 19 GA (PN 2671291401)
❒ One (1) welded tube, 12 inch x 20 inch, coated CS, 19 GA (PN 2671291301)
❒ One (1) welded slip tube, 12 inch x 20 inch, coated CS, 19 GA (PN 2671330901)
❒ One (1) welded slip tube, 12 inch x 39 inch, Coated CS, 19 GA (PN 2671331001)
❒ One (1) welded slip tube, 12 inch x 8 inch, coated CS, 19 GA (PN 2561330701)
❒ Three (3) 12 inch slip tube ring seal (PN 26713203)
❒ One (1) 12 inch Conair flange to 12 inch adapter (PN 18477902)
❒ Nine (9) 12 inch bolted pull ring, galvanized (PN 2671350301)
❒ Six (6) 12 inch U-shaped gasket, 19 GA (PN 2671360301)
❒ Two (2) 12 inch hose connection, coated CS, 19 GA (PN 2671400301)
❒ One (1) 12 inch Conair hard pipe gasket (PN 185107916)
❒ Six (6) 12 inch insulation (PN 25902418)
❒ Two (2) 12 inch hose, high temp (PN 2400071102)
❒ Four (4) 12 inch hose clamps (PN 24900126)
❒ One (1) 12 inch 90° insulation (PN 18195702)
❒ Twenty-four (24) 5/16-18NC x 1 inch hex head wiz lock cap screw (PN 21202504)
❒ Twenty-four (24) 516-18 hex head wiz lock nut (PN 22300804)
❒ Twenty-five (25) feet of 3 inch ASJ SSL insulation tape (PN 25910404)
❒ One (1) 8 inch hard pipe flange x 12 inch tubing adapter (PN 1847791001)
For more information about
adding a Conair Hard Pipe
Kit to your drying system,
contact Conair.
Conair’s sales number is
724-584-5500.
Conair’s Instant Access
24/7 Parts and Service
number is 800-458-1960.
Outside the U.S., dial
814-437-6861.
To Next Page