Control Module Genus G1 Mark II - NETWORK SETUP Configuration (Continued); Secondary DNS Setting; Enable Telnet Configuration; Telnet Port Configuration

Genus G1 MARK II Users Manual
UM3010-2
SECONDARY DNS
Specify a secondary Domain Name Server (DNS). This entry is optional if the terminal
does not need access to DNS services. This screen will not appear if DHCP is
enabled.
Use the 0-9 and the or keys to
advance or return through fields.
Press to enter choice and advance to
next network setup option.
ENABLE TELNET
Enables the telnet interface to the terminal.
Use the or keys to set to
Yes or No.
Press to enter choice and advance to
next network setup option.
TELNET PORT
Select a port to listen on for telnet configuration. This screen will not appear if the
telnet interface is disabled.
Pressing will zero out the Telnet port
settings.
Use 0-9 and the and keys to
advance and return.
Press to enter choice and advance to
next network setup option.
Revision B 10-30-07 23
NETWORK SETUP
<0-9><E><H>
SECONDARY DNS:
000.000.000.000
NETWORK SETUP
<UP><DWN><E><H>
ENABLE TELNET:
Y
NETWORK SETUP
<0-9><E><C><H>
TELNET PORT:
09999