Genus G1 MARK II Users Manual
UM3010-2
SETUP PIN
Personal Identification Number (PIN) that is used for security to prevent unauthorized entry
into the setup mode.
Press to select.
Use 0-9 to enter pin.
Press to save settings and to return to
MAIN MENU.
Note: To remove the SETUP PIN after it is assigned and saved the user must know
the PIN to return to this screen. Press the clear key to remove the PIN,
and to save.
Revision B 10-30-07 30
SETUP PIN
<0-9><E><H>
ENTER SETUP PIN:
<UP><DWN><E>
SETUP PIN?
To Next Page
Loading...
