Cooper Menvier SD3 - User Manual

CONTENTS
INTRODUCTIONINSTALLATIONCOMMISSIONINGOPERATION
1
Contents
Introduction 2
Main features ..........................................................................................3
Specifications .........................................................................................
4
SD3 panel layout .....................................................................................4
Installation 5
General ..................................................................................................5
Mounting instructions ..............................................................................5
SD3 internal board layout .......................................................................
5
Control panel (SELV) connections ........................................................6
Telephone (TNV) connections ..............................................................
7
GSM module installation ..........................................................................8
GSM module operation ................................................................. 10
Commissioning 11
Getting started .....................................................................................11
Using the programming menu ..............................................................
12
Accessing the programming menu ....................................................
12
Exiting from the programming menu ..................................................
12
Programming menu options ..............................................................
12
Basic setup .......................................................................................12
Programming menu options list .............................................................
13
Contact Details .................................................................................. 14
Messages ........................................................................................15
Voice messages ............................................................................
15
Text messages ..............................................................................
16
System Options ................................................................................. 17
Trigger Polarity ..............................................................................
17
Remote Options ............................................................................17
SMS Options .................................................................................18
Display Options .............................................................................18
Alarm Levels ..................................................................................19
Record Options .............................................................................
19
Report Options ..............................................................................19
Line Priority ...................................................................................19
Access Codes ...................................................................................20
Acknowledgement and Abort Options ..............................................21
HL
Abort Options ................................................................................21
Clear by Options ........................................................................... 21
Outputs ............................................................................................. 22
Call Routing Options .........................................................................23
Set Date and Time ............................................................................
23
View Log ...........................................................................................
24
Test Options ......................................................................................
25
Test Messages ..............................................................................
25
Test Outputs .................................................................................
26
Test Triggers ..................................................................................
26
Test Line ........................................................................................
27
Test Supply ...................................................................................
27
GSM Phone Utilities ......................................................................27
Software Version ...........................................................................
28
Operation 29
How to acknowledge a voice message .................................................29
Aborting an alarm call ............................................................................ 29
Recording and playing a memo locally ..................................................
29
Using the remote access feature ...........................................................
30
Remote access by dialling in ............................................................. 30
Remote access via an alarm call ........................................................ 30
The remote access menu ..................................................................
31
Toggle outputs ..................................................................................
31
Listen-in & talkback mode .................................................................31
Testing triggers remotely ....................................................................
32
Entering contact numbers remotely ...................................................
32
Remotely recording and playing messages ........................................
32
Alarm voice and restore messages ................................................
32
Memo messages ...........................................................................32
Text Editing Keys ..................................................................................
33
Declaration of Conformance .................................................................. 34

Summary

Installation

Mounting Instructions

Step-by-step guide for physically installing the SD3 unit.

Control Panel (SELV) Connections

Trigger Inputs (A to H)

Telephone (TNV) Connections

GSM Module Installation

To Install the GSM Module

Step-by-step guide for fitting the GSM module and SIM card.

GSM Module Operation

To Use GSM Module Features

To Register Your SIM Card

Steps to register the SIM card with service providers (O2, T-Mobile, Orange, Vodafone).

Commissioning

Getting Started

Initial setup advice, including factory reset.

To Prompt a Factory Reset

Procedure to reset the unit to factory default settings.

To Change the Display Language

Using the Programming Menu

Accessing the Programming Menu

How to enter the programming mode from standby.

Exiting from the Programming Menu

Procedures for safely exiting the programming mode.

Programming Menu Options

Basic Setup

Programming Menu Options List

Contact Details

Messages

System Options

Access Codes

Ack & Abort

Outputs

Test Options

Various tests for messages, outputs, triggers, line, supply, GSM, and software.

Call Routing

Options to define which contacts receive specific messages.

Contact Details

To Add;Change Contact Details

Step-by-step guide for adding or modifying contact information.

Messages

Voice Messages

To Record a Voice Message

Procedure for recording alarm, restore, and site voice messages.

Text Messages

To Edit Text Messages

Procedure for creating and editing up to 40-character text alarm/restore messages.

SMS Options

SMS Call Number

Access Codes

To Change the User Code

Procedure to change the 4-digit user code for local access.

To Change the Remote Code

Procedure to change the 4-digit remote code for remote access.

Acknowledgement and Abort Options

Abort Options

Clear by Options

Outputs

To Program an Output

Steps to configure the function of outputs 1 to 4.

Call Routing Options

Trigger Alarm

Trigger Restore

Auto Report

To Program Call Routing Options

Procedure to set up call routing for alarms, restores, and auto reports.

View Log

To View the Event Log

Procedure to access and view the SD3's event log entries.

Test Options

Test Messages

Testing voice messages by calling selected contacts.

To Test Messages

Step-by-step guide for performing voice message tests.

Test Outputs

To Test Outputs

Procedure to switch and test the unit's outputs.

Test Triggers

To Test Triggers

Procedure to activate and check the response of trigger inputs.

Test Line

To Test the Line

Testing the fixed telephone line status.

Test Supply

To Test the Supply Voltage

Testing the unit's supply voltage.

GSM Phone Utilities

To Use GSM Phone Utilities

Accessing GSM utilities like Make Call, Signal Strength, etc.

Operation

How to Acknowledge a Voice Message

Steps for recipients to confirm receipt of a voice message.

Aborting an Alarm Call

Methods to stop or cancel an alarm call sequence.

Recording and Playing a Memo Locally

To Record A Memo Message

Procedure for recording a memo message.

To Playback a Memo Message

Procedure for playing back a recorded memo message.

Using the Remote Access Feature

Remote Access by Dialling In

Method to access the unit by dialling into it directly.

To Dial In for Remote Access (One Ring Answer OFF)

Steps for dial-in remote access when answerphone defeat is off.

To Dial In for Remote Access (One Ring Answer ON)

Steps for dial-in remote access with answerphone defeat enabled.

Remote Access via an Alarm Call

Accessing remote functions after receiving an alarm call.

To Acknowledge a Call and Select Remote Access Mode

Steps to acknowledge an alarm call and enter remote access.

The Remote Access Menu

Toggle Output 1

Toggle Output 2

Toggle Output 3

Toggle Output 4

Listen-in;Talkback Mode

Play Alarm Voice Messages 1 to 8

Record Alarm Voice Messages 1 to 8

Play Restore Messages 1 to 8

Record Restore Messages 1 to 8

Enter Contact Phone Numbers 1 to 10

Remotely entering or changing contact phone numbers.

Test Alarm Messages 1 to 10

Playback Memo

Record Memo

Toggle Outputs

To Toggle Outputs

Steps to remotely control the on/off state of outputs.

Listen-In & Talkback Mode

To Select Listen-in;Talkback Mode

Steps to select listen-in or talkback mode remotely.

Testing Triggers Remotely

To Test Triggers Remotely

Procedure to test trigger response via telephone.

Entering Contact Numbers Remotely

Command 7 Allows You to Enter;Change Contact Numbers

Steps to remotely manage contact phone numbers.

Remotely Recording and Playing Messages

Alarm Voice and Restore Messages

Recording and playing alarm/restore voice messages remotely.

To Record;Play a Voice Alarm;Restore Message

Memo Messages

To Record;Playback a Memo

Cooper Menvier SD3 Specifications