page-12 EVOLUTION COVER
KEY SWITCH OPERATION DIAGRAM
This label shows you how to turn the key into the key
switch to lift up or lower the cover.
The label is located on the key switch.
FIGURE 5: KEY SWITCH OPERATION DIAGRAM
TECHNICAL SPECIFICATION LABEL
These labels show you the important technical
specifications. They are located on the operator
cover.
The European label is used for the units sold in
Europe and the North American label is used for the
units sold in North America.
NOTE
These labels also show the serial number of the
cover.
FIGURE 6: TECHNICAL SPECIFICATION LABEL FOR
EUROPEAN UNITS
FIGURE 7: TECHNICAL SPECIFICATION LABEL FOR
NORTH AMERICAN UNITS
240799 OWNER'S MANUAL REVISION 4
To Next Page
Loading...