page-22 EVOLUTION COVER
FIGURE 19: DO NOT TIE FROM THE TOP OF THE CRATE
Always make a visual inspection of the condition of
the crate before attempting any action with the
forklift.
SECURE THE PERIMETER
Before or while handling the crate with the forklift or
any other lifting tool, the forks should be fully under
the crate before any elevation and should be moved
by one of the two short sides indicated on the crate.
No one should be in front, beside or around within 12'
(3.6 m) of the crate being handled. The crate should
not be kept higher than 6" (152 mm) from the ground
at all times to avoid injury to workers and helpers see
Figure 20.
Make sure the forklift is stopped and the crate down
and stable on the floor before approaching the crate
for further handling or unpacking. If the crate seems
to be unbalanced, unstable, tilting or wobbly, do not
attempt any action in any circumstances to stabilize
by hand.
FIGURE 20: SECURE THE PERIMETER
UNPACKING PROCEDURE
1.
Before unpacking the unit, make sure there is
no visible damage to the crate. In case of any
suspicious damage, take pictures first and
please call Covana customer service
immediately. Always stand the crate in the
vertical position. Make sure the wind
conditions are safe enough when unpacking
the components.
2.
Remove the top and back cardboard see
Figure 21.
240799 OWNER'S MANUAL REVISION 4
To Next Page
Loading...