To Next PageTo Next Page
Need help?Do you have a question about the CPS MAXXAIR MX134 and is the answer not in the manual?
General| Brand | CPS |
|---|---|
| Model | MAXXAIR MX134 |
| Category | Diagnostic Equipment |
| Language | English |
Alerts the user to high pressure conditions and shutdown procedures.
Specifies the maximum refrigerant capacity and actions for overfill conditions.
Lists optional accessories available for the machine.
Details the general specifications of the MX134 machine.
Provides specifications for the vacuum pump component.
Details the specifications of the built-in refrigerant scale.
Lists specifications for CPS refrigerant tanks.
Details specifications for the optional heater blanket accessory.
Explains the main selectable functions on the Home Screen.
Describes the various touch keys and information icons used.
Details how to use the Print key for reports.
Explains how to access the Help Menu for assistance.
Describes accessing Machine Upkeep and its functions.
Outlines the various setup options available.
Explains how to access the Maintenance Menu.
Guides through using the Hybrid Vehicle key for flushing hoses.
Instructions for changing the machine's display language.
How to configure pressure, temperature, and weight units.
Procedures for setting tank and refrigerant weights.
Configuration options for the Job Tracker feature.
Instructions for setting up Bluetooth and Wi-Fi devices.
Steps for connecting to Wi-Fi networks.
How to configure the machine's date and time.
Guide for registering the machine online for warranty.
Steps to enter shop details for registration.
How to choose between SAE and International standards.
Steps for changing and resetting the filter/dryer.
Guidelines for frequency and procedure of vacuum pump oil change.
Procedures for scale calibration and zeroing.
Steps for taring and calibrating the pressure transducer.
How to perform an automatic air purge.
Procedures for diagnosing valves, controls, and scales.
Instructions for updating the machine's software.
Steps to recalibrate the touch screen.
Details about the included temperature probe.
