48
“E1-BAD TXT EPROM”; A bad scale may cause this, also.
“E2-SCALE ADC”; Connection to the scale electronics lost.
“E3-SCALE EPROM”; Scale not calibrated?
“E4-CANNOT CAL”; Scale cannot be calibrated or bad calibration.
“E5-MBV FAULT: X”; Where X is a number from 1 to 5 indicating which MBV has failed.
“E6-AMB. THRM”; Ambient thermistor in the “head” is bad.
“E7-TNK THRM”; Thermistor attached to the oil sep. is bad.
“E8-PT TRANS”; Pressure transducer is bad.
“E9-WEAK BATT”; Should never appear.
“E10-BAD FILTERTIME”; Filter code problems.
“E11-DEFAULTS NOT SET”; What it says…
“E12-BAD GRAPH MEM”; Problems with the graphics like Chinese and Russian.
“E13-BAD PTR. TO INFO MEM”; Major software corruption, fatal error.
“E15 FLOW SWITCH ERROR” Air flow switch is open.
“UNKNOWN ERROR”; Cause of problem cannot be identified
MX ERROR CODES
Part Number Description
FX3030X1 FX Series Maintenance Kit
QCL134 Auto Cplr Brass Low Side 14mm
QCH134 Auto Cplr Brass High Side 14mm
AR2788X14A R134a Refill Hose Adapter 1/2 Acme
AR2788X14B R134b Refill Hose Adapter 1/4 SAE
CRX430T 30lb 400psi Recovery Tank
CRX400T 50lb 400psi Recovery Tank
481500 Spotgun Oil Injection Kit
REPLACEMENT PARTS
To Next Page
Loading...