the current year, month, date, and time setting currently in the system in following format: 2018 Apr 28 15:45
with the Year highlighted. Press the Keypad numbers to enter the current year. Month will then be highlighted.
To change the month press the “A” Key to scroll forward through the months or the “B” Key to scroll backward
through the months. With the correct month showing, press the “” Key to save. Date will then be highlighted.
Press the Keypad numbers to enter the current date. Hour will then be highlighted. Note: Hours are shown in 24
hour format. Press the numbers to enter the current hour. Minutes will then be highlighted. Press the numbers
to enter the current minutes. The Display will then change to show “OK? =Y (Yes) CLR = N (No)”. You must press
“” Key to save the new Date and Time entered. Pressing “CLR” Key will revert to the previous date and time
setting. Press the “CLR” Key to return to “SETUP MODE”.
SET PRICES
To set the prices enter the “SERVICE MODE” by opening the Service Door and pressing the Service Button once.
This mode allows the setting of Regular Prices and Secondary Prices for an individual item, a complete tray, or the
entire machine. Factory setting is $99.95. Press the number “7” Key and the Display will show “SET PRICE”. Press
the “” Key and the Display will show “1 = Regular Pricing, 2 = Secondary Pricing”. To set Regular Prices press
number “1” Key and Display will show “Regular $##.##”. To set price:
1. All selections. Press the Keypad numbers of the price you wish to use. As numbers are entered the
numbers will shift in from the right as they are entered. Note: The CLR Key will remove the last # of the
price. Once the desired price is showing on the Display press the “” Key and the Display will show
“PR$##.## All Set”, press “” Key to set more prices or “CLR” Key to return to SET PRICES. Press “CLR”
Key again to return to SERVICE MODE.
2. One tray. Press the Keypad numbers of the price you wish to use. As numbers are entered the numbers
will shift in from the right as they are entered. Note: The “CLR” Key will remove the last # of the price.
Once the desired price is showing on the Display press the Tray letter desired for setting price. Press “”
Key and Display will show “PR $##.## B (tray letter) Row Set”, press “” to set more prices or “CLR” Key
to return to SET PRICES. Press “CLR” Key again to return to SERVICE MODE.
3. Single selection. Press the Keypad numbers of the price you wish to use. As numbers are entered the
numbers will shift in from the right as they are entered. Note: The “CLR” Key will remove the last # of the
price. Once the desired price is showing on the Display press the selection desired for setting price. Press
“” Key and Display will show “PR $##.## B1 Selection Set”, press “” Key to set more prices or “CLR”
Key to return to SET PRICES. Press “CLR” Key again to return to SERVICE MODE.
The last price entered for a selection is the price that will be used. For example, If one price on the A tray was set
to $1.50 using option 3 above and you wish to change the remaining selections on that tray using option 2, the
pricing for the entire tray would take precedence. Conversely, if the price was set using option 2 first followed by
the single selection using option 3, the pricing for the remainder of the shelf would remain and the new price for
the single selection would change to the new value. Press the “CLR” Key to return to “SERVICE MODE”.
SET NOT AVAILABLE TIMES
This is a Password protected menu item. Before entering or changing this setting you must enter the password if
one has been assigned. This mode allows up to 4 different time periods that use of the Machine may be restricted.
To Set Not Available Times enter “SETUP MODE 1” by opening the Service Door and pressing the Service Button 3
times. Press the number “3” Key; the Display will show “SET NOT AVAIL TIME”. Press the “” Key and the Display
will show “Select Block (1 – 4): Press number “1” Key to set Select Block 1 available settings, Key “2” for Select
Block 2, etc… Once you select the Select Block # you wish to set the Display will show “Start MTWTFSS Stop 1
00:00 NNNNNNN 00:00” with the Start time hour highlighted. Press the numbers to enter the hour you wish to
start Select Block (Note: hour setting is in 24 hour format.) and then the minutes will be highlighted. Press the
number Keys to enter the minutes and then the first day of the week current setting will be highlighted. To change
the setting to No press the “2” Key, or for Yes press the “1” Key. This will change each setting left to right one day
at a time until all are set then Stop time hour will be highlighted. Press the numbers to enter the hour you wish
to stop Select Blocking and the minutes will be highlighted. Press the numbers to set the minutes and the Display
will show “Save? = Yes CLR = No” press the “” Key to save these settings or “CLR” Key not to save settings and
To Next Page
Loading...
Need help?
General
