Need help?Do you have a question about the Crane BevMAX Refresh 4 and is the answer not in the manual?
General| Model | BevMAX Refresh 4 |
|---|---|
| Bottle Capacity | Varies by configuration |
| Can Capacity | Varies by configuration |
| Power Supply | Standard electrical outlet |
| Voltage | 115 VAC |
| Cooling System | Refrigerated |
Read manual, use qualified technician, proper tools, genuine parts, safe operation.
Serial number format indicates model, year, month, date, and build number.
Table showing dimensions and weight for models 5800-4/3800-4 and 5800-E4/3800-E4.
Inspect for shipping damage upon receipt, notify customer service if damaged.
Remove protective materials, shipping boards, check parts and accessories.
Details voltage, frequency, and power requirements for the vending machine.
Adjust leveling legs to ensure the machine is stable and properly aligned.
Converts AC voltage to 24VDC for machine operation.
Distributes AC input and converts to 24VDC for various components.
The VMC controls all peripheral boards and machine functions.
Details the hermetically sealed refrigeration unit components.
Understand options and procedures for programming the VMC via keypad.
View temperature, date/time, and software revision externally via Display.
Set Date/Time by entering SETUP MODE 1 and using keypad.
Set Regular and Secondary Prices for items, trays, or the entire machine.
Simplified troubleshooting using error codes and Cabinet Peripheral Control Board lights.
Checks for power issues: cord plugged in, outlet voltage, GFCI, AC Distribution Box switch.
Troubleshooting steps for lack of X or Y motor movement, checking door switches, picker errors.
Troubleshooting steps for cup picker not cycling, checking door switches, cup motor board.
Table of problems, causes, and fixes for coin acceptance issues.
Table of problems, causes, and fixes for bill acceptance issues.
Table of problems, causes, and fixes for VMC issues like no power or error codes.
Flow chart to diagnose and fix issues when all coins are rejected.
Flow chart to diagnose and fix issues when a selection will not vend.
Flow chart for diagnosing ice/frost on evaporator, checking drain tube and air leaks.
Flow chart for compressor not starting, checking door switch, voltage, temp sensor, and board.
Flow chart for machine not cooling, checking condenser, airflow, seals, and fan.
To Next Page
