CRG LF100 - 4.4 Sales Setup

20
COM1/COM2. Setup the system parameters No.13 for COM1 or No.14 for
COM2 before use the kitchen printer.
For more detail setup, please check “Table 4-1 No.13, COM1 setup”.
4.4 Sales setup.
Setup the discount rate, service charge, reduction, and report in this part.
1. Discount
Please check Table 4-1, system parameter setup, No.11.
2. Service charge
Please check Table 4-1, system parameter setup, No.10 and No12. (If the
service charge parameter do not setup in the No.10, you should input “5”,
then press 【%+】)
3. Reduction
Please check Table 4-1, system parameter setup, No.9.
4. Reprint the sale receipt
Please check Table 4-1, system parameter setup, No.21.
5. Report setup
Please check Table 4-1, system parameter setup, No.17.