CRG LF100 - Kitchen Printer Setup

19
3. Use the cursor key to choose “DH”. Then
press 【SBT】to confirm.
4. Press 【SBT】to enter in the Settlement setup.
5. Use the cursor key to choose “DH&DW”. Press 【 SBT 】 to confirm, and
【CASH】to return.
Note: Can set these functions in the P mode System setting → System Param
→ No. 18.Rect. Font.
Please check Table 4-1, system parameter setup. No.18, the receipt font
setup.
4.3.2.3 Thermal printer setup.
Setup the printer color, receipt space, and line space in this part.
Note: Can set these functions in the P mode System setting → System Param
→ No. 20. Prt Param.
Please check Table 4-1, system parameter setup. No.20, the Prt Param.
4.3.3 Kitchen printer setup.
B series models can connect the external printer (kitchen printer) by using the
Name Set
Settlement
Item name
SBT—Confirm
Sett. Fond:
Normal
SBT—Confirm