(9)【SBT】to choose “N”. Press【CASH】to return. And input stock 1000.
(10)【SBT】, finish to setup this PLU. The machine will show as:
Note:
The PLU information will be saved until finished to setup all the PLU
information. (Press 【SBT】 to go to the next option if the current one do not
need to enter. Or press 【shift】+【SBT】to save.)
The PLU stock must be confirmed, or this PLU information could not be saved.
PLU code can begin from “0”.
Please do not change the PLU income price and stock, it will make the gross
and stock wrong.
5.1.1 Modify the PLU information.
Operation: In P mode “Basic Info” → “PLU Setting” →【SBT】→ Input the PLU
code need to be modified →【SBT】
5.1.2 Change the PLU stock.
Operation: In the input stock status, press 【CANCEL】, then input the new
stock no., then press 【SBT】to confirm.
Add the stock numbers, just input the numbers you need to add.
Example: previous stock is 60, and now you want to change it to 100, so just
input 40.
Code: 1001
Flag1: 00005000
Flag2: 00000000
Stock:1000
To Next Page
Loading...
