CRG LF100 - Numbers of Guest; Taste Information Setup

49
Then will get the receipt:
6.8.4 Numbers of Guest
Here can check how many guests in each table so that it’s better to do the
personnel assignment for manager.
Note: Make sure the key【Guest】have been programmed. (Function code is
40). For more detail, please check “4.3.1 Keyboard Function Setup.”
Operation: In R mode, assign a new table → do the sale → input the numbers
of this table → 【Guest】→ continue to sell.
Add more guests: In the table assigned state, input the no. you want to add
→【Guest】
Change the guest numbers: In the table assigned sate, input the new guests
no. →【Shift】→【Guest】.
 You can check the table no. and the guest no. in the “Table receipt”
6.8.5 Taste Information Setup
The taste information will be used for the food (maybe one department, PLU,
or a group). It can be sent to the kitchen printer according to the attrib setting.
Note:
 Make sure the key【Taste】(function code is 37), have been programmed.
For more detail, please check “4.1.3 Keyboard Function Setup”
YOUR RECEIPT
= = = = = = == = = = == = = = = = == = =
TABLE 12 40.00
**TRANSFER TO**
TABLE 15 50.00
TOTAL 90.00