CRG LF100 - PLU with VAT

30
3.【SBT】→ Please input the VAT name if you want to change the VAT1. Then
press【SBT】If not, press【SBT】directly.
4.Program the VAT2 as the above operations. Or press【Cancel】to return.
5.7.1 PLU with VAT
Each PLU can have one of four taxes and they are calculated by either VAT
method or Add-On Tax method.
Example: Setup the PLU as, code is 1002, name “book”, price 100, link to
VAT1 which has been programmed as 15%. Operations should be,
1. Do the same operation as 5.1 PLU setup.
In P mode → Basic Info → PLU Setting →Input the PLU code 1002 → name
“book” → price 100 → Press 【.】 to enter in the Flag1.→ cursor key to get
the tax option. (Please note this PLU does not controlled by department. So
“Function1 link to dept.should be “NO”)
Name: VAT1
Abc:
Code: 0002
Rate: 0.00
Name: VAT2
Tax included?
Y/N
SBT-Select <– –>