Note:
The max. content of the “Ref. No.” is 18 characters.
You can change the “Ref. No.” to other name you want in P mode “Basic
Info” → “Other Name”
The content of the “Ref. No.” can be sent to kitchen printer.
Example: The customer toke a photo in the photo studio, and will take the
photo on 18
th
, Nov. Now we can use the “Ref. No.” function to take a mark in
the customer receipt. Operations should be:
a. In P mode “Basic Info” → “Other Name”. You can change the No.6 “Ref.
No.” to “Take Time”
b. In R no selling mode, press “Ref. No.” which is programmed in the
keyboard. And input the content is “18
th
Nov.”
c. Do the normal sale, the customer spend 7 to take this photo.
6.7.5 Hold Bill Function
Hold Bill Function means save up the sales data and the customer wants to
settlement later when selling. The max. of the hold bills are 5.
Example: One customer purchased a note book and a pen in the supermarket.
He wants to hold this bill to pay it later. Operations should be:
Hold Bill: Sale the products →【HOLD】→ get the hold bill receipt with the hold
bill no.
Recall the Bill: Input the hold bill no. → 【 HOLD 】 → continue current
transaction
Check the hold bill: In R mode,【Shift】→【HOLD】, use the cursor keys to
check.
6.8 Restaurant Management.
6.8.1 Assigning a table
There are three methods to assign a table: Input the table no. manually, the
machine will give the sequence tale no. , assign the table according to the bill
of assigned.
To Next Page
Loading...
