CRG LF100 - Chapter 4. System Setup; 4.1 System Basic Setup; 4.1.2 System Parameter Setup

7
Chapter4. System Setup
4.1 System Basic setup
System Basic setup includes the Date& Time setup, Communication setup,
Keyboard function setup, and Operator setup.
4.1.1 Date & Time setup.
Operation: P position → System setting→ Date & Time
4.1.2 System Parameter setup.
P mode → System setting →【SBT】→System parameter →【SBT】
The machine will show as:
Programming explanation please read the table 4-1.
Table 4-1
System
parameters
Format
Setting method
1.Shop No.
0000
0000-9999
2.ECR No.
0XXX
001-254
3.Baud Rate
0000
Setting communication baud rate between the
machine and back software or peripherals via
COM port.
If the value extends to more than 4 numeric, input
4 numeric ahead. For example, 1152 means the
baud rate 115200.
4.Reserved
0000
System Param.
01. Shop No. 0000
02. ECR No. 0001
03. Baud rate 9600