CRG LF100 - Suspense the Table & Recall It

47
1. Input the table no. manually.
Operation:
Note: Make sure the table no. have been setup.
In P mode “System Setting” → “System Param.” → 24. Table Set → input the
table numbers (The max. is 250. ) → do the machine initialization
In R mode, input the table no. →【TABLE】key → do the sale
2. The sequence table no.
Operation:
In R mode, press【TABLE】key → the ECR will give the sequence useful table
no. automatically.
The rules should be small table no. priority.
3. According to the bill of assigned.
Operation:
In R mode, press【Shift】 → 【TBL TRANS】→ the ECR will show the useful
table → use the cursor keys to select and【SBT】to confirm.
The ECR shows:
6.8.2 Suspense the table & Recall it.
Suspense the table:
Example: The customer assigned the table10, and purchased a bar of beer
(PLU code is 2, unit price is 35.00), and a packet of jerky (PLU code is 3, unit
price is 5.00). Then let this table suspense.
Operations:
No.:1
Name: TBALE1
Prev Next