◆ Label Header: program the receipt header information. Max. characters is
28.
◆ Label Footer: program the receipt footer information. Max. characters is
28.
Note: When the first time to put/ change the printer paper. For example,
change 40*30 (mm) paper to 60*40 (mm). Please put the paper firstly, then
press the “PAUSE” key, then power on the printer. Now the printer will adjust
the printing format automatically according to the paper size. Or the printing
content will show error message.
Before use the label printer, please setup the following parameters firstly:
◆ Parameter 13: 0409= printing normal. 1409=double height
◆ the PLU/dept flag 2 (EFGHABCD): E=1, send to label printer;
◆ Set up the paper size, and space line.
Please check the following setup method for different label printer paper
size:
To Next Page
Loading...
