Periodic Maintenance and Adjustment 8-11
1. Torque Bolt
Tightening torque:
Oil filter cartridge:
17 Nm(1.7m·kgf,12.38ft·lbf)
7. Install the drain bolt and tighten it to the
specified torque.
Tightening torque:
oil drain bolt:
30 Nm (3.0m·kgf, 21.85ft·lbf)
8. Fill with the specified amount of the
recommended oil. Replace the dipstick and
tighten it.
Recommended oil:
Oil quantity:
Oil filler not replaced:
1.9L (1.67 lmp qt, 1.97 US qt)
Oil filler replaced:
2.0L (1.76 lmp qt, 2.08 US qt)
1CAUTION:
To avoid clutch slip (since the engine oil
also lubricates the clutch), do not mix any
chemical additives. Do not use oils with a
To Next Page
Loading...
