9-1 Cleaning and Storage
Cleaning
Keep clean of the ATV not only make it
appear beautiful but also keep its efficient
function and extend the service life of
components on the vehicle.
Before cleaning ATV:
● Bock the end of exhaust pipe to avoid the
water in. Plastic bag and strong rubber tape
are available.
● Make sure the spark plug and oil tank
cover have been installed correctly.
Clean the oil stain away, If it is too much on
the engine body.
Clean away dust and oil stain with soft water
pipe.
1CAUTION:
High pressure of water will make the vehicle
hydrops, and will make the function of the
brake system, seal parts of transmission and
electrical parts deteriorated.
With warm Neutral detergent water to clean
the surface when most of the dust is washed
away. An old toothbrush or small round brush
which used to clean the glass bottle could be
used to clean the place which could not catch
easily.
Wash with clear water right away, and then
wipe dry with soft leather, clean towel and
absorbent cloth.
With leather cleaner to clean the seat
cushion, keep it is soft and smooth.
To Next Page
Loading...
