Periodic Maintenance and Adjustment 8-39
1CAUTION:
Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise
reduce the transparency of the glass; the
luminosity of the bulb and the bulb life will
be adversely affected. Thoroughly clean off
any dirt and fingerprints on the headlight
bulb using a cloth moistened with alcohol or
thinner.
1. Do not touch the glass part of the bulb.
6. Install the bulb holder by pushing it in
and turning it clockwise.
7. Install the bulb holder cover and the
cover at the rear of the headlight.
Replacing a taillight
1. Tail/brake light bulb holder
1. Remove the burned out bulb from the
bulb
holder by pushing it inward and turning it
counterclockwise.
To Next Page
Loading...
