Crossfire X400 - How to Measure Tire Pressure

Pre Operation Check List 5-11
Higher pressures may cause the tire to burst.
Inflate the tires very slowly and carefully.
Rapid inflation could cause the tire to burst.
How to measure tire pressure
Use the low-pressure tire gauge, which can
be found in the ATV tool kit package.
1. Low-pressure tire gauge
NOTE:
The low-pressure tire gauge is included as a
standard equipment. Make two
measurements of the tire pressure and use
the second reading. Dust or dirt in the gauge
could cause the first reading to be incorrect.
Set pressure with the tire cold.
Set tire pressures to the following
specifications:
Recommended
pressure
Minimum Maximum
Front
69 kpa
(0.70kpf/cm
2
,
10 psi)
62 kpa
(0.63kpf/cm
2
,
9 psi)
76 kpa
(0.76kgf/cm
2
,
11 psi)
Rear
69 kpa
(0.70kpf/cm
2
,
10 psi)
62 kpa
(0.63kpf/cm
2
,
9 psi)
76 kpa
(0.76kgf/cm
2
,
11 psi)