6-6 Operation
6. Remember that wet brakes will reduce
brake performance. Operate your ATV at
safe speeds and apply the brakes
repeatedly to let friction dry the linings.
Only when the brake performance
returns to normal can the ATV be driven
as usual.
WARNING
POTENTIAL HAZARD
The brakes get wet.
WHAT CAN HAPPEN
The ATV may go out of control because of the
wet brakes. An accidents may occur.
HOW TO AVOID THE HAZARD
1. Check the braking performance. If the
braking function does not return to normal,
the ATV should not be operated.
2. If the brake performance degrades, you
should slow down your ATV and apply the
brakes repeatedly to dry them. Only after the
braking performance returns to normal
should the ATV be driven.
Parking brake
● Stop the ATV using the brake pedal。
● Shut off the ignition switch.
● Operate left brake lever to engage the
parking brake and use the latch to
keep the left lever applied to maintain
the brake status.
To Next Page
Loading...
