EasyManua.ls Logo

Crossfire X400 - Page 134

Crossfire X400
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodic Maintenance and Adjustment 8-29
[1]. Minimum level mark
Observe these precautions:
1. When checking the fluid level, make sure
the top of the master cylinder reservoirs
are level.
2. Use only the designated quality brake
fluid, otherwise the rubber seals may
deteriorate, causing leaks and poor
brake performance.
Recommended brake fluid: DOT 4
3. Refill with the same type of brake fluid.
Mixing fluids may result in a harmful
chemical reaction and lead to poor brake
performance.
4. Be careful that water does not enter the
master cylinder reservoirs when refilling.
Water will significantly lower the boiling
point of the fluid and may result in vapor
lock.
5. Brake fluid may deteriorate painted
surfaces or plastic parts. Always clean off
spilled fluid immediately. Have a dealer
check the cause if the brake fluid level
goes down.
Brake fluid replacement
Complete fluid replacement should be
done only by trained service
personnel.
Have a dealer replace the following
components during periodic mainten-

Table of Contents

Related product manuals